PERSONAL COMPUTER
|
 |
Windows 98 SE (Second Edition), Windows NT (except for the USB Sat Modem which
is not supported by Windows NT), Windows 2000, Windows Millennium or Windows XP |
 |
|
Pentium II processor 300 MHz or higher |
|
|
64 MB RAM minimum, 128 MB recommended* |
|
|
Microsoft Internet Explorer 5.5 |
|
|
Hard Disk 60 MB free space |
|
|
2D Video board; 3D recommended |
|
|
Audio board |
|
|
One PCI slot or one USB port available, depending on the Sat Modem you choose |
|
|
Analogue or ISDN modem |
|
* Minimum configuration for Windows Millennium and XP |
|
|
DVB CARD SETTINGS
|
|
Frequency: 11746 MHz |
|
|
Symbol rate: 27500 |
|
|
Polarization: Horizontal Left (High) |
|
|
PID Unicast: 1600 (decimal) |
|
|
Filtering: Mac Address filtering (not IP filtering)
|
|
|
SATELLITE SYSTEM REQUIREMENTS
|
To use Netsystem services you need to receive the Eurobird satellite signal (9.0º E).
|
|
Satellite dish (see coverage for diameter requirements) |
|
|
Universal converter |
|
|
F-Type connector
|
|
Single satellite system or residential multicable satellite systems with QPSK Modulation capable to deliver
satellite signals in 1st IF are suitable for the services provided by Netsystem.
|
|
If you do not have a satellite dish, installing it requires only a few hours and a low cost. |
|
|
If you already have a satellite dish but you do not receive Eurobird 9.0º East signal,
you can avoid moving or changing the dish by installing a dual feed at a minimal expense.
|
|
